TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 895 of 1275
TM9-2350-311-20-1 9-11 ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR This task covers: a. Removal b. Disassembly c. Assembly d. Installation Tools Cotter pins (6) (item 40, Appx G) General mechanic’s tool kit (item 64, Appx H) Cotter pins (2) (item 41, Appx G) Key washer (item 186, Appx G) Materials/Parts Lockwashers (8) (item 95, Appx G) Cotter pin (item 43, Appx G) Lockwashers (5) (item 96, Appx G) Cotter pin (item 205, Appx G) Spring pins (2) (item 9, Appx G) a. Removal 1 Remove cotter pin (1) and pin (2) at bell crank (3). Discard cotter pin. 2 Remove two cotter pins (4), three flat washers (5), spring (6), and rod assembly (7) from throttle control lever (8). Discard cotter pins. NOTE Remove throttle control lever (8), if damaged or requiring transmission, according to step 3. replacement at 9-40 INITIAL SETUP