TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 885 of 1275
TM9-2350-311-20-1 9-10 SERVICE AND PARKING BRAKE LINKAGE This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Adjustment TOOIS Lockwasher (item 78, Appx General mechanic’s tool kit (item 64, Appx H) Lockwashers (11) (item 95, Lockwashers (6) (item 108, G) Appx G) Appx G) Materials/Parts Lockwire (item 30, Appx G) Cotter Pin (item 49, Appx G) Retaining ring (item 7, Appx G) Cotter pins’ (4) (item 40, Appx G) Seal (item 135, Appx G) Cotter pins (2) (item 46, Appx G) Seal (item 177, Appx G) Gasket (item 203, Appx G) a. Removal 1 Remove screw (1) and Iockwasher (2). Discard Iockwasher. 2 Support parking brake linkage (3) and remove two screws (4) and two Iockwashers (5). Discard Iockwashers. 3 Pull bell crank at screw (1) off bracket spindle and remove parking brake linkage (3). 4 Disconnect electrical connector (6). 5 Remove two screws (7), two Iockwashers (8), parking Iockwashers. brake light switch (9), and bracket (10. Discard 9-30 INITIAL SETUP