TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 875 of 1275
TM9-2350-311-20-1 9-8 STEERING CONTROL LINKAGE — CONTINUED e. Adjustment — Continued 2 3 4 5 Remove two pins (14 and 24) to disconnect rod assembly (27). Loosen two nuts (57). Increase end-to-end rod length by turning two rod ends (59). Install rod assembly (27) with two pins (14 and 24). Tighten two nuts (57). Turn steering wheel (34) full right and hold. Check for contact between rod end (59) and top of bulkhead hole. If interference exists, go to step 5. If no interference exists, go to step 10 and adjust location of boot (28). Remove two pins (14 and 24) to disconnect rod assembly (27). Loosen two nuts (57). 9-20