TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 850 of 1275
TM9-2350-311-20-1 a. b. c. d. Removal 1 Disconnect connector (4) on inside of driver’s compartment. 2 Remove four nuts (5), four Iockwashers (6), four flat washers (7), Iockwasher (8), and four screws (9), and disconnect connector (1) from driver’s bulkhead. Discard Iockwashers. 3 If replacement is necessary, remove four nuts (10), four Iockwashers (11), four washers (12), four screws (13), gasket (14), and cover (15). Remove nut (16) and bolt (17) and disconnect positive lead (2) from battery terminal. Discard Iockwashers and gasket. 4 Remove nut (18) and bolt (19) and disconnect ground lead (3) from battery terminal. Disassembly Disassemble lead assembly (para 2-13). Assembly Assemble lead assembly (para 2-13). Installation 1 Connect ground lead (3) to battery terminal with bolt (19) and nut (18). 2 If replaced, connect positive lead (2) to battery terminal and install bolt (17) and nut (16). Install new gasket (14), cover (15), four screws (13), four washers (12), four new Iockwashers (11), and four nuts (10). 3 Connect connector (1) to driver’s bulkhead and install new Iockwasher (8), four screws (9), four flat washers (7), four new Iockwashers (6), and four nuts (5). 4 Connect connector (4) on inside of driver's compartment. FOLLOW-ON MAINTENANCE: NOTE Connect batteries (para 8-28) 8-205