TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 846 of 1275
TM9-2350-311-20-1 b. Disassembly/Repair Disassemble wiring harness (para 2-13). c. Assembly Assemble wiring harness (para 2-13). d. Installation 1 2 3 4 5 6 Remove nut (12) and Iockwasher (13) at engine starter. Discard Iockwasher. Install ground lead 5A (2), new Iockwasher (13), and nut (12) at engine starter (14). Remove nut (9) and Iockwasher (10) at starter solenoid. Discard Iockwashers. Install electrical lead 6A (3), new Iockwasher (10), and nut (9) at starter solenoid (1 1 ). Install connector (1), four flat washers (7), four new Iockwashers (6), four screws (5), and four nuts (4) at engine electrical disconnect bracket (8). Install two clamps (17), two flat washers (16), and two screws (15), securing wiring harness (18). NOTE FOLLOW-ON MAINTENANCE: Install powerplant (para 4-5) 8-201