TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 810 of 1275
TM 9-2350-311 -20-1 c. Assembly Assemble wiring harness (para 2-13). d. Installation 1 Install wiring harness (20). Connect cable (3), new Iockwasher (13), screw (12), and boot (15) on external power receptacle (14). 2 Install external power receptacle guard (11 ), four new Iockwashers (10), and four screws (9). 3 Connect slave start connector (4) at driver’s bulkhead (8). 4 Install power (1) and ground lead (2), two new Iockwashers (6), and two screws (5) to slave start receptacle (7). 5 Apply electrical tape to exposed slave start connections (1 and 2) and external power receptacle connection (3). 6 Install 14 straps (19), 14 flat washers (18), 14 new Iockwashers (17), and 14 screws (16), securing wiring harness (20). NOTE FOLLOW-ON MAINTENANCE: Connect batteries (para 8-28) 8-165