TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 809 of 1275
TM9-2350-311 -20-1 8-83 NATO SLAVE START-TO-EXTERNAL POWER WIRING HARNESS (M109A4/M109A5) — CONTINUED a. Removal 1 2 3 4 5 6 7 Cut electrical tape to expose slave start connections. Remove two screws (5) and two Iockwashers (6) to disconnect power (1) and ground lead (2) from slave start receptacle (7). Discard Iockwashers. Disconnect slave start connector (4) at driver’s bulkhead (8). Remove four screws (9), four Iockwashers (10), and external power receptacle guard (11). Discard Iockwashers. Cut electrical tape to expose external power receptacle connections. Remove screw (12) and Iockwasher (13) to disconnect cable (3) from external power receptacle (14), and remove boot (15) from external power receptacle. Discard Iockwasher. Remove 14 screws (16), 14 Iockwashers (17), 14 washers (18), and 14 straps (19) and lift out wiring harness (20). Discard Iockwashers. b. Disassembly/Repair Disassemble wiring harness (para 2-13). 8-184