TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 727 of 1275
TM 9-2350-311 -20-1 8-30 BILGE PUMP RELAY — CONTINUED b. Installation Ensure MASTER switch is OFF when working on bilge pump relay to avoid electrical shock and burns. 1 Remove two nuts (2), two Iockwashers (3), two screws (6), four external-tooth Iockwashers (4), and two flat washers (5). Secure starter relay (8). Discard Iockwashers and external-tooth Iockwashers. 2 Install bilge pump relay (7), two flat washers (5), four new external-tooth Iockwashers (4), two screws (5), two new Iockwashers (3), and two nuts (2). 3 Connect electrical connector (1). 8-82 WARNING