TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 711 of 1275
TM 9-2350-311 -20-1 8-25 SERVICE AND BLACKOUT TAILLIGHTS, STOP LIGHTS, AND LAMPS This task covers: a. Removal b. Installation General mechanic’s tool kit (item 64, Appx H) Parts Antiseize compound (item 8, Appx D) Lockwashers (4) (item 96, Appx G) Preformed packing (item 197, Appx G) Silicone compound (item 18, Appx D) a. Removal 1 2 3 4 WARNING Ensure MASTER switch is OFF when working on light to avoid electrical shock and burns. NOTE Steps 1 thru 8 are for removal of service taillight; steps 9 thru 16 are for removal of B.O. taillights. Taillight does not need to be removed from vehicle to replace LEDs. Remove two screws (1), cover plate (2), and two spacers (3) from inside hull. Disconnect three electrical connectors (4). Remove two screws (5), two Iockwashers (6), and two flat washers (7) from inside hull. Discard Iockwashers. Remove taillight assembly (8), grommet (9), and electrical leads (10) from outside hull. 8-66 Tools Materials/