TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 634 of 1275
TM9-2350-311-20-1 WARNING 17 18 19 20 21 22 23 24 25 Radiator weighs 88 lb (39.9 kg). Two personnel are required during removal and installation. Adhesives are toxic and flammable. Apply adhesives only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and don’t breath vapors. Do not use near heat, sparks, or open flame. Read and follow all warnings and instructions on labels of adhesives. If contact with skin or eyes is made, wash area with water and seek medical aid immediately. Apply adhesive (item 3, Appx D) on radiator inlet tube (13). Install radiator (14) and radiator inlet tube and tighten two inlet hose clamps (12). Apply adhesive (item 3, Appx D) to mating surface of two radiator vent hoses (11). Install vent hoses and tighten two clamps (10). Apply adhesive (item 3, Appx D) to mating surface of radiator outlet tube (9). Connect radiator outlet tube (9) and tighten two clamps (8). Install two resilient mounts (7), two flat washers (6), two new Iockwashers (5), and two screws (4). Apply adhesive (item 3, Appx D) to mating surfaces of surge tank-to-radiator hose (2) and radiator-to-aeration detector hose (3). Install two hoses and tighten two clamps (1). Install three clamps (34), three flat washers (33), three new Iockwashers (32), and three screws (31), securing radiator vent hoses (11). Refill radiator with coolant (TM 9-2350-311-10). Apply adhesive (item 5, Appx D) to new gasket (56) and install gasket on radiator cap (55). Install cap (55) with new gasket (56) on radiator (14). 7-29