TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 62 of 1275
TM 9-2350-311-20-1 2-13 WIRING HARNESS AND CABLE REPAIRS — CONTINUED 2-13.3 Typical Male-Type Panel Mounting Receptacle — Continued 2-13.3.2 Assembly a. Strip cable insulation equal to depth of solder wells of pin contacts. b. Insert cable leads into solder wells of pin contacts and solder using resin core solder. c. Push insert into shell from rear until seated. Groove in insert must be alined with guide in shell to ensure proper fit. d. Push pin contacts into insert from rear until seated. 2-13.4 Typical Female-Type Panel Mounting Receptacle with Ridged Locking Nut 2-13.4.1 Disassembly a. Unscrew nut from shell assembly and slide back on cable. b. Slide grommet back on cable leads. c. Drive socket contacts out through front of insert with pin extractors. d. Unsolder leads from socket contacts. e. Push insert out through rear of shell. 2-13.4.2 Assembly a. Strip cable insulation equal to depth of solder wells of socket contacts. b. Slide nut over cable. c. Slide grommet over cable leads. d. Insert cable leads into solder wells of socket contacts and solder using resin core solder. 2-14