TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 559 of 1275
TM 9-2350-311 -20-1 6-2 FUEL TANK FILLER ASSEMBLY (CAP, SEAL, AND FILLER) This task covers: a. Removal b. Installation Tools Dry-cleaning solvent (item 21, APPX D) General mechanic’s tool kit (item 64, Appx 1+) Gasket (item 102, Appx G) Gaskets (2) (item 120, APPX G) Materials/Parts LockWashers (6) (item 96, APPX G) Cotter pin (item 46, Appx G) a. Removal 1 2 3 4 5 Do not smoke or use open flame when working on fuel system. An explosion may occur, causing severe injury or death. Remove locking pin (1), cotter pin (2), straight pin (3), and cover (4). Discard cotter pin. Unscrew filler cap (5). Unclip filler cap chain (6) from filler tube (7). Slide filler cap gasket (8) sideways over locking tab (9). Remove and discard gasket. Remove eight screws (10), top washer (11 ), outer seal (12), inner seal (13), and bottom washer(14) (items 11 thru 14 can be removed as a unit). 6-4 INITIALSETUP