TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 528 of 1275
TM 9-2350-311 -20-1 b. Installation 1 Install new preformed packing (14), split flange (13), and hose (5) on rear of engine oil cooler. 2 Install four newIockwashers(12) and four screws (11). 3 Install new preformed packing (10), split flange (9), and hose (4) on front of engine oil cooler. 4 Install four new Iockwashers (8) and four screws (7). 5 Connect hoses (4 and 5) by tightening two nuts (6). 6 Install new strap (3) on hoses (4 and 5) (M109A4/M109A5). 7 Install two drain plugs(1) into oil filters (2). 8 Check engine oil level (TM 9-2350-311-10). 5-4 OIL FILTER ASSEMBLY AND ENGINE OIL SAMPLING COMPONENTS This task covers: a. Removal b. Installation Tools Filter elements (2) (item 106, Appx G) General mechanic’s tool kit (item 64, Appx H) Preformed packings (2) (item 183, Appx G) Suitable container Torque wrench (item 72, Appx H) References TM 9-2350-311-10 Materials/Parts Gaskets (2) (item 187, Appx G) Equipment Conditions Gasket sets (2) (item 194, Appx G) Transmission access doors open (para 11-7) 5-7