TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 52 of 1275
TM 9-2350-311-20-1 2-6 INITIAL PROCEDURES — CONTINUED 2-6.3 Assembly of Equipment The M109A2/M109A3/M109A4/M109A5 hull equipment and systems are shipped as assembled units. Assembly is not required. However, assembly of hull components is discussed in detail in Chapters 4 thru 12 of this manual. These chapters provide detailed information on removal, disassembly, assembly, and installation of equipment for maintenance purposes. 2-6.4 Equipment Installation Instructions Installation instructions for the M109A2/M109A3/M109A4/M109A5 hull require installation of on-board vehicle equipment, equipment racks, and stowage of equipment in the hull as shown in Chapter 13. Installation of other components removed for maintenance purposes is discussed in detail in Chapters 4 thru 12 of this manual. Follow all precautions on DD Form 1397, Processing and Reprocessing Record for Shipment, Storage, and Issue of Vehicles and Spare Engines. One tag will be with the Records Book and one in an envelope attached to a headlamp. 2-7 DECALS, LABELS, AND INSTRUCTION SIGNS 2-7.1 Removal NOTE • Replace only decals, labels, and instruction signs that are damaged, illegible, or missing. • All decals, labels, and instruction signs are removed and installed using the same procedure. Scrape label (1) from mounting surface (2). Discard label. 2-4