TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 453 of 1275
TM 9-2350-311-20-1 NO POWER TO VEHICLE FROM SLAVE START RECEPTACLE; SLAVED VEHICLE HAD POWER WHEN OPERATING ApplicabIe Configurations M109A2/M109A3 TOOIS General mechanic’s tool kit (item 64, Appx H) Multimeter (item 36, Appx H) TA-1 probe kit (item 43, Appx H) Equipment Condltions Batteries disconnected (para 8-28) 1. Disconnect slave start cable from vehicle being slaved. 2. Place red lead of multimeter on slave start cable center contact and black lead to outer contact. 3. Check for voltage. Is voltage present? Replace slave start cable or troubleshoot slaving vehicles electrical system. B 1. Reconnect slave start cable to vehicle to be slaved. Slave start cable must be fully seated in slave start receptacle. 2. Place red lead of multimeter on slave start receptacle positive terminal (lead 49) and black lead on negative terminal (lead 50). 3. Check for voltage. I Is voltage present? Replace slave start receptacle (para 8-38). CONTINUED ON NEXT PAGE 3-353