TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 429 of 1275
CONTINUED FROM STEP B 1 E 1. Reconnect lead 76B to bulkhead-to-portable instrument panel wiring harness. 2. Leave in-tank fuel pump lead assembly disconnected from relay. 3. Place red lead of multimeter in socket A (lead 10) and black lead to ground. 4. Turn MASTER switch ON and check for voltage. 5. Place red lead of multimeter in socket B (lead 10) and black lead to ground. 6. Turn MASTER switch ON and check for voltage. 7. Turn MASTER switch OFF. Is voltage present at both sockets? I I Go to step K, if voltage is not present in both sockets. If voltage is present in only one socket, repair or replace lead 10 of in-tank fuel pump lead assembly (para 8-73). TM 9-2350-311-20-1 Go to step N. 3-329