TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 337 of 1275
TM 9-2350-311-20-1 CONTINUED FROM STEP B Replace FUEL GAGE switch (para 8-17). , c 1. Reconnect lead 31 to lower FUEL GAGE switch. 2. Place FUEL GAGE switch in LOWER position. 3. Disconnect bulkhead-to-driver’s instrument panel wiring harness from driver’s bulkhead, 4. Place a jumper wire from pin H to socket H (lead 459). 5. Turn MASTER switch ON and check FUEL LEVEL gage for a reading. 6. If FUEL LEVEL gage shows a maximum reading, place a jumper wire from socket J (lead 31) to ground. 7. Check gage for a reading. 8. Turn MASTER switch OFF. Does FUEL LEVEL gage show minimum when grounded and maximum when not grounded? Repair or replace lead 31 of bulkhead- to-driver’s instrument panel wiring harness (para 8-50). harness (para 8-47) Repair or replace lead 31 of bulkhead- to-headlights/bilge pump wiring END OF TASK 3-237