TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1234 of 1275
TM 9-2350-311-20-1 If vehicle has failed step 2 of GO 6, start with step 1. If vehicle has failed step 1 of GO 6, start with step 2. Check that air inlet is clear of tools, debris, dirt, and dust before performing following test. - Remove air cleaner filter from air cleaner (para 6-13). - Repeat GO 6, step 2, Figure 2, sheet 18. Does engine pass the power test with air cleaner filter out? Reinstall air cleaner filter (para 6-1 3). Install new air cleaner filter (para 6-13). After completing repair, rerun GO CHAIN tests to verify problem has been fixed and that no other problems exist. Start at GO 2 (Figure 2, sheet 8) if VTM is already connected. Otherwise start at GO 1 (Figure 2, sheet 1). Figure 3, Sheet 31 of 36 I-57 Go to step 2, Figure 3, sheet 32. NOTE CAUTION NOTE