TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1101 of 1275
14-4 COOLANT PUMP — CONTINUED b. Installation 1 Install coolant pump (5) and three screws (10). 2 Install clamp bracket (9), two screws (8), two flat washers (7), and two nuts (6). 3 Remove plugs from coolant inlet hose (3) and coolant outlet hose (4) and connect hoses to coolant pump (5). If plugs were not used, refill coolant system (TM 9-2350-311-10). 4 Tighten two hose clamps (2) on hoses (3 and 4). 5 Connect electrical lead (1). 14-8 TM 9-2350-311-20-1