TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1089 of 1275
TM 9-2350-311-20-1 13-5 PORTABLE FIRE EXTINGUISHER MOUNTING BRACKET, PROJECTILE SPACER BOX, AND RIFLE STOWAGE CLIPS — CONTINUED a. Removal — Continued NOTE Steps 2 and 3 apply to projectile spacer box. 2 Remove projectile spacers (4) if present. NOTE Some projectile spacer boxes may have screws and Iockwashers located on back of box instead of on bottom of box. 3 Remove four screws (5), four Iockwashers (6), and projectile spacer box (7). Discard Iockwashers. NOTE Steps 4 and 5 apply to rifle stowage clips. 4 Remove four screws (8), four Iockwashers (9), four rifle stowage clips (10), eight washers (11), and four straps (12) in crew compartment. Discard Iockwashers. 5 Remove screw (13), Iockwasher (1 4), rifle stowage clip (15), and strap (16) in driver’s compartment. Discard Iockwasher. b. Installation NOTE Steps 1 and 2 apply to rifle stowage clips. 1 Install strap (16), rifle stowage clip (15), new lockwasher (14), and screw (13) in driver’s compartment. 2 Install four straps (12), eight washers (11), four rifle stowage clips (10), four new Iockwashers (9), and four screws (8) in crew compartment. NOTE . Locations of portable fire extinguisher mounting bracket and projectile spacer box differ on M109A2/M109A3 and M109A4/M109A5 Howitzers. The following procedures apply no matter where the location. M109WM1O9A3 shown. l Steps 3 and 4 apply to projectile spacer box. l Some projectile spacer boxes may have screws and Iockwashers located at back of box instead of at bottom of box. 3 Install projectile spacer box (7), four new Iockwashers (6), and four screws (5). 13-10