TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1070 of 1275
TM 9-2350-311-20-1 12-3 HEATERS This task covers: a. Removal b. Installation Applicable Configuration S . . Materials/Parts M109A4/M109A5 External-tooth Iockwashers (4) (item 75, Appx G) Lockwashers (4) (item 76, APPX G) Tools Lockwashers (2) (item 192, Appx G) General mechanic’s tool kit (item 64, Appx H) a. Removal NOTE The following procedure applies to heaters at both driver's and cannoneer no. 2’s stations. Heaters come in various designs. The following procedure applies to all of these designs although the actual heater may differ in appearance from those illustrated. 1 Disconnect electrical connector wire 439B (1) of heater (2) at driver’s station or wire 439C (3) of heater (4) at cannoneer no. 2’s station. 2 Loosen two clamps (5). Slide clamps back over two hoses (6). 3 Pull two hoses (6) free from heater (2 or 4). 12-9