TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1039 of 1275
11-16 FENDERS This task covers: a. Removal b. Installation INITIAL SETUP Tools General mechanic’s tool kit (item 64, Appx H) Cotter pins (2) (item 45, Appx G) Snap ring pliers (item 41, Appx H) a. Removal NOTE Left and right fenders are removed using same procedure. 1 Remove three screws (1), front fender (2), and retainer (3). 2 Remove two cotter pins (4), straight pin (5), two washers (6), spring (7), and rear fender (8). Discard cotter pins. b. Installation NOTE Left and right fenders are installed using same procedure. 1 Install rear fender (8), spring (7), two washers (6), straight pin (5), and two new cotter pins (4). 2 Install front fender (2), retainer (3), and three screws (1). 11-60 TM 9-2350-311-20-1