Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download

Page 1038 of 1275

TM 9-2350-311 -20-1 NOTE When replacing old cable, do not attempt to adjust new cable to length of old cable. 3 Check strut (27) position relative to latch socket (56). Strut should be in latch socket. If strut is not in socket, continue adjustment step 4. 4 Remove screw (33) and cable (29). 5 Loosen nut (57) until strut (27) seats in latch socket (56), then tighten. 6 Reconnect cable (29) and install screw (33). NOTE Spade adjustment should be verified in firing position as soon as practical. 7 Raise and lower spade several times to verify adjustment. 11-59