TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1026 of 1275
TM9-2350-311-20-1 b. Disassembly WARNING Gun tube must be out of support arm before disassembly. Support arm is heavy and must be secured with hoist or laid down to prevent support arm from falling and causing serious injury or death. 1 Remove two cotter pins (29), two flat washers (30), and two headed pins (31). Discard cotter pins. 2 Remove travel lock cap (3) and cap lining (32). Discard lining. 3 Remove cotter pin (33), flat washer (34), headed pin (35), Iockpin (1), wire rope assembly (36), clevis (37), and handle (2). Discard cotter pin and wire rope assembly. 4 Remove tee (38) and nut (39). NOTE Perform step 5 if travel lock was removed without removing mounting bracket. 5 Remove four screws (5), four Iockwashers (6), and two torsion spring retaining bars (7). Discard Iockwashers. 11-47