TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1023 of 1275
TM9-2350-311 -20-1 SECTION Ill. TRAVEL LOCK, SPADE, FENDERS, AND TOWING PINTLE 11-14 TRAVEL LOCK This task covers: a. Removal b. Disassembly c. Assembly d. Installation and Adjustment e. Adjustment INITIAL SETUP TOOIS General mechanic’s tool kit (item 64 AppX H Sling (item 60, Appx H) Socket wrench set (item 56, AppX H) Torque wrench (item 71, AppX H) Adhesive (item 2, Appx D) Cap lining (item 161, Appx G) Cotter pins (2) (item 52, Appx G) Cotter pins (3) (item 49, Appx G) Lockwashers (6) (item 89, Appx G) Primer (item 74, Appx D) Self-locking nuts (7) (item 223, Appx G) Wire rope sleeves (2) (item 152, Appx G) Wire ropes (2) (item 159, Appx G) a. Removal WARNING Gun tube must be out of support. Support arm is heavy and must be secured with hoist or laid down to prevent support arm falling and causing serious injury or death. 1 Remove pin assembly (1). 2 Lift handle (2) to unfasten travel lock cap (3). 3 Elevate and traverse cannon tube (4) to clear travel lock. WARNING Travel lock must be secured to avoid possible injury during removal. 4 Secure travel lock cap (3). Replace pin assembly (1). NOTE Steps 5 thru 13 remove travel lock without removing mounting bracket. Step 14 thru 17 removes travel lock with mounting bracket attached. 11-44