TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1022 of 1275
TM9-2350-311-20-1 4 Remove spring pin (11). Discard spring pin. 5 Remove four screws (12), four flat washers (13), upper slide (14), lower slide (15), and shims (16). 6 Remove inside and outside handle assemblies (17) with components. b. Installation 1 Install inside and outside handle assemblies (17) with components. 2 Install shims (16), lower slide (15), upper slide (14), four flat washers (13), and four screws (12). 3 Install new spring pin (11). 4 Install rod assembly (10), new preformed packing (9), flat washer (8), and new self-locking nut (7). 5 Install headed pin (6) and new cotter pin (5). 6 Install bracket (4), two flat washers (3), two screws (2), and pin (1). 11-43