TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 1002 of 1275
TM9-2350-311-20-1 a. Removal 1 Disconnect hose assembly (1) at clamp (2). Move hose assembly out of way. 2 Remove 12 screws (3), 12 Iockwashers (4), engine compartment access cover (5), and seal (6). Discard Iockwashers and seal. b. Installation WARNING When installing engine compartment access cover, ensure that all screws are secured. Carbon monoxide poisoning could result in serious injury or death if cover is loose. Adhesives are toxic and flammable. Apply adhesives only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and don’t breath vapors. Do not use near heat, sparks, or open flame. Read and follow all warnings and instructions on labels of adhesives. If contact with skin or eyes is made, wash area with water and seek medical aid immediately. 1 Apply adhesive to seal (6). Install seal (6), engine compartment access cover (5), 12 new Iockwashers (4), and 12 screws (3). 2 Connect hose assembly (1) and tighten clamp (2). 11-23