TM-9-2350-311-10 M109 Operator's Manual for M109A2, M109A3, M109A4 and M109A5 Download
Page 706 of 775
TM 9--2350--311--10 G--2 Change 6 G--1 GENERAL STATEMENTS — CONTINUED e. Abbreviations The following abbreviations for the various lubricants used in this appendix are provided below. OE/HDO Lubricating Oil, Internal Combustion Engine (ICE), Tactical Service (MIL--PRF--2104) OEA Lubricating Oil, Internal Combustion Engine (ICE), Arctic (MIL--L--46167) OHT Hydraulic Fluid, Petroleum Base, Preservative, Hydraulic Equipment (MIL--PRF--6083) NOTE CLP replaces RBC, PL-S, LSA, and LAW. CLP Cleaner, Lubricant, Preservative (MIL-L-63460) GO Lubricating Oil, Gear, Multi-purpose (MIL-PRF-2105) GGP Grease, General Purpose (MIL--G--23549) GMD Grease, Molybdenum Disulfide (MIL--G--21164) CT Corrosion Preventive Compound (MIL--L--16173) GAA Grease, Automotive and Artillery (MIL--PRF--10924) O-156 Lubricating Oil, Aircraft Turbine Engine (MIL--L--23699) f. Parts Cleaning WARNING Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If solvent gets on skin or clothing, wash immediately with soap and water. Use cleaning compound (item 9.1, Appx D) to clean parts. g. Corrosion Control Follow corrosion control procedures as indicated (para 1--4). G--2 OIL FILTER STATEMENT When Army Oil Analysis Program (AOAP) service is available, change oil and filters at the direction of the AOAP labo- ratory. When AOAP service is not available, change oil and filters at 75 hours or 750 miles of operation.