Sign up to sell your inventory with NSN Lookup

TM-9-2350-311-10 M109 Operator's Manual for M109A2, M109A3, M109A4 and M109A5 Download

Page 600 of 775

TM 9-2350-311-10 5-64.4 Change 4 g. Procedure Number 7, M782 Fuze — Continued (d) Press the ENTER button. The Mode Menu for the M782 appears. Mode Menu ➔TIME VT DELAY PD (e) Press the right ( ↑ ) or left ( ↓ ) button to move the cursor ( → ) to indicate TIME, then press the ENTER button. The Time Menu appears with a line ( _ ) cursor under the hundreds place. Time Menu 1 00.0 sec (f) Press the right ( ↑ ) or left ( ↓ ) button to toggle between 0 and 1 for the hundreds digit, then press the ENTER button. The cursor ( _ ) will move to the tens place. Time Menu 00 0.0 sec (g) Press the right ( ↑ ) or left ( ↓ ) button to choose a number between 0 and 9 for the ones digit, then press the ENTER button. The cursor ( _ ) will move to the ones place. Time Menu 030 .0 sec (h) Press the right ( ↑ ) or left ( ↓ ) button to choose a number between 0 and 9 for the ones digit, then press the ENTER button. The cursor ( _ ) will move to the tenths place. Time Menu 035.0 sec (i) Press the right ( ↑ ) or left ( ↓ ) button to choose a number between 0 and 9 for the tenths digit, then press the ENTER button. The Fuze Setting Menu appears with the cursor pointing to the TIME line (showing the set time). Fuze Setting Menu FUZE: M782 MODE: TIME ➔TIME: 35.2 sec SET FUZE (j) Press the left ( ↓ ) button to move the cursor ( → ) to indicate SET FUZE. Place setter on the fuze and press the ENTER button. The setter will attempt to set the fuze. After the “WAIT” message is briefly displayed either the “FUZE SET OK” message will be displayed which means the fuze has been set, or the “FAILED” message will be displayed. . If “FAILED” appears, try setting another fuze. If both fuzes do not accept the setting, replace the fuze setter and try setting the fuzes. 5 Auto-setting is accomplished via an inductive data link between the fuze and a weapon equipped with an auto-set fire control system. The desired fuze setting is inputted into the setter console then transmitted. The fuze will be remotely activated and set, and the console will display the actual fuze setting as a safety feature. 6 Firing temperature for the M782 is -45ºF to +145ºF (-43ºC to +63ºC).