TM-9-2350-311-10 M109 Operator's Manual for M109A2, M109A3, M109A4 and M109A5 Download
Page 597 of 775
TM 9-2350-311-10 Change 4 5-64.1 g. Procedure Number 7, M782 Fuze — Continued (c) Press the right ( ↑ ) or left ( ↓ ) buttons to move the cursor ( → ) indicate M782, then press the ENTER button. The fuze setting menu appears with the cursor pointing to the MODE line. Fuze Setting Menu FUZE: M782 ➔MODE: TIME TIME: 187 sec SET FUZE (d) Press the ENTER button. The MODE menu for the M782 appears. Mode Menu ➔TIME VT DELAY PD (e) Press the right ( ↑ ) or left ( ↓ ) buttons to move the cursor ( → ) to indicate PD, then press the ENTER button. The Fuze Setting Menu appears with the cursor pointing to the SET FUZE line. Fuze Setting Menu FUZE: M782 MODE: PD ➔SET FUZE (f) Place setter on the fuze and press the ENTER button. The setter will attempt to set the fuze. After the “WAIT” message is briefly displayed either the “FUZE SET OK” message will be displayed which means that the fuze has been set, or the “FAILED” message will be displayed. If “FAILED” appears, try setting another fuze. If both fuzes do not accept the setting, replace the fuze setter and try setting the fuzes. 2 Setting for delay (DLY) mode using PIAFS M1155 NOTE When the setter is first initialized it displays the Fuze Menu, afterwards it remembers where it was last and displays the Fuze Setting Menu and the last fuze set. (a) Press the ENTER button to turn on the setter Fuze Setting Menu ➔FUZE: M782 MODE: TIME TIME: 187 sec SET FUZE (b) Press the right ( ↑ ) or left ( ↓ ) buttons to move the cursor (arrow ( → ) to the left of the items in the menu) to indicate FUZE, then press the ENTER button. Fuze Menu ➔M762 DM-52 M767 DM-74 M782 *MORE* C32 *QUIT* (c) Press the right ( ↑ ) or left ( ↓ ) buttons to move the cursor ( → ) indicate M782, then press the ENTER button. The fuze setting menu appears with the cursor pointing to the MODE line. Fuze Setting Menu FUZE: M762 ➔MODE: TIME TIME: 187 sec SET FUZE