TM-9-1290-365-24&P Technical and Parts Manual for Paladin Muzzle Velocity System M93 Upgraded Download
Page 81 of 334
ARMY TM 9-1290-365-24&P SECTION VI. TRANSCEIVER ASSEMBLY, P/N 13002074 Section Contents Subject Page General ................................................................................................................................. 3-33 Removal ................................................................................................................................ 3-33 Installation ............................................................................................................................. 3-33 3.6. TRANSCEIVER ASSEMBLY, P/N 13002074 3.6.1. General. The following paragraphs provide removal and installation procedures for the M93 MVS, Transceiver Assembly, P/N 13002074. Source, maintenance, and recoverability code is PAODD. 3.6.2. Removal. Refer to Figure 3-12. Remove Transceiver Assy as follows: a. Remove four screws (1 ) and four lockwashers (2) using 5-mm hex key wrench. b. Remove Transceiver Assy (4) from Bracket Assy (3). 3.6.3. Installation. Refer to Figure 3-12. Install Transceiver Assy to Bracket Assy as follows: a. Attach Transceiver Assy (4) to Bracket Assy (3). a. Install four screws (1 ) and four lockwashers (2) using 5-mm hex key wrench. 3.6.4. Disposition. The Item Manager for the M93/M94 MVS provides 'Disposition' instructions for serviceable/unserviceable spares, repairs or end item components. The procedure is outlined in AR 725-50, Chapter 7, Nov 95 regarding submission of the item for repair. Any failed item should be sent back to Borisch Manufacturing Corp. for repair/replacement. An FTE is required for any returned items. The contract is DAAE20-98-C-0089. The repair facility associated with the contract is: Borisch Manufacturing Corporation 4511 East Paris Se Grand Rapids, MI 49512 DODACC: CMASD8 RIC: CCA Depending on the severity of the failure, it can take a maximum of three working weeks. If the failure can’t be repaired, the item must be replaced with a new one at the unit’s expense. There is no warranty for the MVS. Change 1 3-33/(3-34 blank)