TM-9-1290-365-24&P Technical and Parts Manual for Paladin Muzzle Velocity System M93 Upgraded Download
Page 52 of 334
ARMY TM 9-1290-365-24&P 3.1.2 Materials Required. Repair materials and other consumable item required for general maintenance of the MVS are listed in Table 3-2. Table 3-2. Materials Required Nomenclature Type/Part No. Appendix F Item No. Lint-Free Cloth 8722-0088 7 Alcohol TT-I-735A 4 Paint MIL-C-46168 Color 383 IAW FED-STD-595, CARC 21 Methyl Ethyl Ketone (MEK) ASTM-D-740 14 Equivalent substitutes may be used for above items. 3.1.3 Cleaning. WARNING Use solvent in a well-ventilated area. Avoid breathing vapors. Keep away from flame. NOTE Normally, the M93 MVS will not require cleaning of any internal parts because it is sealed against dirt and moisture. a. Clean M93 MVS units with a clean, lint-free cloth moistened with alcohol. Cleaning materials and compounds are listed in Table 3-2. b. Clean cable surfaces with a clean, lint-free cloth moistened with alcohol. c. Remove adhesive and heatsink compounds from parts using MEK. 3.1.4 External Inspection. If any discrepancies are discovered, refer to the applicable repair and replacement procedures provided in the appropriate sections of this chapter. a. Inspect all components for security of attachment. b. Inspect that Mounting Bracket is properly secured to gun. Check for missing bolts or physical damage. c. Inspect Transceiver Radome for physical damage. Clean if necessary. d. Inspect all cables for nicks, cracks, and broken wires. e. Inspect that cables are not pinched or crimped. 3-4