TM-9-1290-365-24&P Technical and Parts Manual for Paladin Muzzle Velocity System M93 Upgraded Download
Page 40 of 334
ARMY TM 9-1290-365-24&P 1.20 MECHANICAL CONSTRUCTION. The transceiver unit consists of the following assemblies: a. RF section assembly. b. Back cover assembly 1.1.20.1 RF Section. For the following description, refer to Figure 1-7. The RF section assembly accommodates all RF components (microstrip antenna, transceiver and RF cable which connects between them), the Doppler amplifier, and the power supply. The Doppler amplifier and the power supply are covered with special covers for EMI protection. A silicone rubber gasket seal is positioned between the RF section and the back cover. 1.1.20.2 Back Cover Assembly. For the following description, refer to Figure 1-8. The back cover assembly accommodates the interface connector, the EMI filter module, and the MVP The connector is protected with a dust cap. Six captive screws fasten the back cover to the RF section. The back cover is recessed at the connector area in a way that provides a handle for easy carrying and contains four mounting holes for mechanical mounting on the mounting bracket. 1-20