TM-9-1290-365-24&P Technical and Parts Manual for Paladin Muzzle Velocity System M93 Upgraded Download
Page 3 of 334
ARMY TM 9-1290-365-24&P SAFETY SUMMARY DEFINITIONS The following definitions apply to the warnings, cautions, and notes used throughout this manual: WARNING Operating procedures, techniques, etc., that may result in personal injury or loss of life if not carefully followed. CAUTION Operating procedures, techniques, etc., that may result in damage to equipment if not carefully followed. NOTE Operating procedures, techniques, etc., that are considered essential to emphasize. The following are general safety precautions that are not related to any specific procedures and therefore do not appear elsewhere in this publication. These are recommended precautions that personnel must understand and apply during many phases of operation and maintenance. KEEP AWAY FROM LIVE CIRCUITS Operating personnel must at all times observe all safety regulations. Do not replace components inside the equipment with the voltage supply turned on. Under certain conditions, dangerous potentials may exist when the power control is in the off position due to charges retained by capacitors. To avoid casualties, always remove power and discharge and ground a circuit before touching it. DO NOT SERVICE OR ADJUST ALONE Under no circumstances should any person service or adjust the equipment except in the presence of someone who is capable of rendering aid. RESUSCITATION Personnel working with or near high voltages should be familiar with modern methods of resuscitation. Such information may be obtained from the Bureau of Medicine and Surgery. SS-1