TM-9-1290-365-24&P Technical and Parts Manual for Paladin Muzzle Velocity System M93 Upgraded Download
Page 174 of 334
ARMY TM 9-1290-365-24&P c. Connector. Inspect the connector for missing protection cap, cap chain, bent or missing pins, broken body, and secure mounting. d. Identification Plate. Inspect for missing or damaged identification plate. e. Threaded Pails. Inspect all threaded parts for crossed, stripped, or otherwise damaged threads. f. Circuit Card Assemblies. Inspect CCA’s lAW their respective inspection requirements. D.3.5 Cleaning and Preservation. If necessary, clean and paint the MVS transceiver in accordance with paragraphs 3.1.3 and 3.1.5 of Chapter 3 in this manual. D.3.6 Corrosion. Refer to paragraph 1.6 of Chapter 1 in this manual for actions required if a corrosion problem is identified. D.3.7 Preshop Analysis. Refer to Table D-1 for the preshop analysis checklist. The table lists the inspections/tests that are necessary to evaluate the condition of the MVS Transceiver prior to overhaul and to determine the maintenance tasks required during overhaul. The checklist should be reproduced locally, as required, for recording preshop analysis checks. D.3.8 Preshop Analysis Checklist. The checklist provides the areas to be inspected and is divided into live columns. The assembly and serial numbers must be filled in. The person receiving the item is to review any accompanying tags or forms, check off either or both, if applicable, then sign and date the sheet. The column headings and purposes are: a. Column 1: Inspection Point. This column indicates the assembly or item to be inspected or tested. b. Column 2: Condition. This column indicates the inspection or test to be performed by main- tenance personnel to determine the condition of the assembly or item. c. Column 3: Action. This column lists the test or repair action required to correct a faulty condition. d. Column 4: Remarks. This column provides space for the maintenance personnel to indicate the results of the inspection, repair or test. e. Column 5: Done. This column provides space for maintenance personnel to indicate completion of each preshop analysis check D-4