TM-9-1240-401-34&P Technical Manual for M109 Telescopes and Mounts Download
Page 54 of 344
2-20 TM 9-1240-401-34&P 2-13. CABLE ASSEMBLY MAINTENANCE INSTRUCTIONS - continued c. Assembly - continued 14 15 Install two insulation sleevings(16) on leads of ca- ble (9). Install two electrical contacts (15) on bushing insu- lator (7); then install two lug terminals (11) on two electrical contacts (15) by installing two nuts (14). 16 Install new gasket (1 3), angle bracket (1 O), and new gasket (12) on bushing insulator (7). 17 18 19 20 Solder cable (9) leads on two lug terminals(11) using solder and flux. Refer to wiring diagram and check continuity of cable assembly. Slide electrical shell connector (8) along cable to- ward angle bracket (10) and secure with four new Iockwashers (6) and four machine screws (5). Install receptacle shell (4) and plate (3) on bushing insulator (7) and secure with shoulder pin (2) and machine screw (1). Tighten bushings (17 and 22).