TM-9-1240-400-34&P Technical Manual for M109 Telescopes and Mounts Download
Page 35 of 344
TM 9-1240-400-34&P 9 1 Apply sealant adhesive (item 5, appx C) to threads of mechanical post (1). 2 Install spring (2), detent plunger (3), and mechanical post (1) to adapter (4). 3 Install cover (5), torsion spring (6), and rod (7). 4 Pull wire with lamp base through to the front of overlay assembly (8). 5 Install overlay assembly (8) onto adapter (4). 6 Apply sealant adhesive’ (item 5, appx C) to tips of three screws (9). 7 Loosely install three new lockwashers (10) and three screws (9). 8 Apply sealant adhesive (item 5, appx C) to threads of externally threaded ring (11). 9 Using tubular spanner wrench (7597638), install externally threaded ring (11) on adapter (4). 10 Insert lamp base portion of overlay assembly (8) into contact of adapter (4). 11 Position wire in recessed area to accommodate cap assembly (12). 12 Install cap assembly (12) and two screws (13). 13 Apply sealant adhesive (item 5, appx C) to outer edge of cap assembly (12). 14 Tighten three screws (9). Section V. GENERAL SUPPORT MAINTENANCE 2-10. MAINTENANCE OF M115 PANORAMIC TELESCOPE. This task covers: a. Disassembly c. Repair b. Cleaning d. Reassembly INITIAL SETUP: Equipment Conditions Tools and Special Tools M1 15 Panoramic telescope removed from Shop equipment, electronic: system M11 A2 howitzer (TM 9-2350-304-20-2) maintenance, (SC 5180-95-CL-B29) Torque adapter (figure 4, appx D) General Safety Instructions Torque wrench (GGG-W-686) Materials/Parts Preformed packing (8587449-2) Use adhesives, cleaning solvents, Preformed packing (8587449-5) and sealing compounds in well- Sealing compound (item 10, appx C) ventilated area away from open Silicone compound (item 11, appx C) flame. Adhesives, cleaning sol- vents, and sealing compounds are References harmful to skin and clothing, can TM 9-254 burn easily, and may give off harm- ful vapor. 2-19