TM-9-1240-400-34&P Technical Manual for M109 Telescopes and Mounts Download
Page 18 of 344
TM 9-1240-400-34&P 2-5. CATEGORIES OF INSPECTION. Categories of inspection define responsibilities: a. An initial inspection of the Ml15 panoramic telescope is performed immediately on receipt for maintenance. This inspection will determine the amount and type of work to be performed. b. A final inspection of the M115 panoramic telescope is performed after repairs have been completed to ensure the item meets serviceability standards. c. Table 2-1 lists initial inspection procedures for the M115 panoramic telescope. Final inspection procedures are located on page 2-57. d. Preembarkation inspection procedures are located on page 2-80. Table 2-1. INITIAL INSPECTION-M115 PANORAMIC TELESCOPE ITEM ITEM T0 NO. BE INSPECTED PROCEDURE NOTE Azimuth testing fixture must be set up before performing initial inspection. Refer to page 2-58. 1 M115 Panoramic Telescope Inspect telescope for completeness and secureness of parts; must be complete and secure. 2 Identification Plate, Index, and Inspect for legibility; must be legible and clearly Counter Numbers defined. 3 Mounting Surfaces Inspect for burrs and corrosion; must be free of burrs and corrosion. 4 Eyeshield Inspect for security of attachment and damage such as deterioration, cuts, or tears; must be secure, without tears, cuts, or deterioration. 2-2