TM-9-1200-215-34&P Technical Manual for M109 Automatic Fire Control System (AFCS) Download
Page 71 of 266
TM 9–1200–215–34&P 2–36 2–21. SERIAL I/O PORT CABLE, VGA CABLE, SCSI RIBBON CABLE MAINTENANCE INSTRUCTIONS DESCRIPTION This task covers: a. Removal b. Installation INITIAL SETUP Tools: Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G (items 34, 35, & 36, Appendix E) Torque Wrench, 0–75 in.–lb (item 43, Appendix E) Materials/Parts: Lockwasher (item 8, Appendix F) Lockwasher (item 1, Appendix F) Primer, Surface (item 21, Appendix D) Sealant, Locktite (item 24, Appendix D) Equipment Conditions: Top panel removed; if not, remove top panel in accordance with paragraph 2–13 Personnel Required: One MOS 35Y a. REMOVAL CAUTION ESD SENSITIVE The ACU contains ESD sensitive components. Wear a protective ESD wrist strap whenever handling components. Failure to comply may result in damage to equipment. 1. Attach ESD grounding strap to wrist and ground to ensure ESD protection. CAUTION The connector panel assembly is attached by cables to internal components of ACU and cannot be moved very far from housing without putting strain on those cables. Exercise caution when removing bottom cover from ACU housing. Failure to comply may result in damage to equipment. Change 1