TM-9-1200-215-34&P Technical Manual for M109 Automatic Fire Control System (AFCS) Download
Page 123 of 266
TM 9–1200–215–34&P 4–9 4–14. TOP COVER ASSEMBL Y , NEOPRENE RUBBER STRIP(S) DESCRIPTION This task covers: a. Removal b. Installation INITIAL SETUP Tools: Tool Kit, JTK–17LAL (item 34, Appendix E) Tool Kit, General Mechanic’s (item 42, Appendix E) Materials/Parts: Cleaning Cloth (item 13, Appendix D) Alcohol, Denatured (item 4, Appendix D) Adhesive (item 1, Appendix D) Rubber Strip, Neoprene (item 22, Appendix D) Equipment Condition: Top cover assembly removed; if not, remove top cover in accordance with paragraph 4–13 Personnel Required: One MOS 35Y a. REMOVAL CAUTION ESD SENSITIVE • The PDIU contains ESD sensitive components. Wear a protective ESD wrist strap whenever handling components. Failure to comply may result in damage to equipment. • Damage to RFI/EMI contact strip may occur. Do not slide cover off of housing. Pick cover straight up. 1. Attach ESD grounding strap to wrist and ground to ensure ESD protection. 2. Carefully scrape damaged neoprene rubber strip(s) (1) from cover (2). WARNING Do not breathe fumes from alcohol. Use with adequate ventilation. 3. Clean mounting area with alcohol and wiping rag. Change 1 2 2–5/16 IN. 1–3/8 IN. 1 IN. 1–3/8 IN. 2–5/16 IN. 3–15/16 IN. 1