MWO-9-1290-365-20-1 M93 Paladin Muzzle Velocity System Download
Page 8 of 12
8 MWO 9-1290-365-20-1 11. CALIBRATION REQUIREMENTS . Not applicable. 12. WEIGHT AND BALANCE DATA . Not applicable. 13. QUALITY ASSURANCE REQUIREMENTS . Not applicable. 14. RECORDING AND REPORTING OF THE MODIFICATION . a. Reporting will be accomplished by electronic means. MWO application information can be input directly into the Modification Management Information System (MMIS) over the Internet. Entry into the MMIS system is password protected. New users can register on-line at https://www.mmis.army.mil/mwo/ . Passwords are normally approved and issued within 48 hours. b. Submission will be comprised of the fifteen (15) data elements listed in table 6, Elements 1, 2, 6, 7, 8, 10 and 12 are provided for this MWO. The person reporting the MWO data will acquire the remaining elements (3, 4, 5, 9, 11, 13, 14 and 15) and input all fifteen elements into the MMIS. Table 6. Data Elements DATA ELEMENT INPUT DATA 1 Materiel Change Number (MCN) 1-03-05-0004 2 MWO Number 9-1290-365-20-1 3 Unit Identification Code (UIC) @ Battalion Level 4 Unit Name 5 Unit Location 6 NSN of the End Item (Old) 1290-01-412-5759 7 NSN of the End Item (New) 1290-01-503-4395 8 Registration Number N/A 9 Date of Application 10 Man-Hours Required for Application 2.5 11 Applied By 12 Software Version N/A 13 Serial Number 14 Your Email Address 15 Comments c. If any of these data elements are not available, or if no record is found, one of the following will be entered for that element: N/A – Not Applicable N/R – No Record Found d. The completed MVS data installation sheets (appendix A) shall be sent to the TACOM-ARDEC Quality Engineer, as follows: Brian Lesko, Paladin Quality Engineer AMSRD-AAR-QEW-A, QESA, ARDEC Picatinny, NJ 07806-5000 DSN 880-6302 COMM (973) 724-6302 FAX (973) 724-3729