MWO-9-1290-365-20-1 M93 Paladin Muzzle Velocity System Download
Page 3 of 12
3 MWO 9-1290-365-20-1 d. Parts Disposition. See table 4 for a list of parts removed during application of this MWO: Table 4. Parts Removed During Application of MWO NOMENCLATURE NSN Part Number QTY CAGEC Transceiver 5895-01-417-7101 12979002 1 ea 19200 Mount, Resilient Gen 5342-00-985-0248 12922110 4 ea 19200 ATTACHING HARDWARE Screws 5305-00-054-6669 MS51957-44 16 ea 96906 Lock washers 5310-00-933-8119 MS35338-137 16 ea 96906 Flat Washers 5310-00-880-5975 REW620C8L 16 ea 81349 Screw 5305-01-240-1796 438285-47 4 ea 07690 Lock Washer 5310-00-933-8121 MS35338-139 4 ea 80205 (1) Transceiver instructions: (a) Transceivers shall be turned-in through respective property book offices for appropriate record- keeping. (b) Transceiver(s) shall be wrapped in a manner which will offer some protection during shipment; i.e., bubble wrap, foam inserts, standard Styrofoam packing, etc. If possible, utilize the box/container and packaging materiels that the upgraded transceivers were shipped in. (c) A DD1348 reflecting “M93 Transceiver, NSN 5895-01-417-7101, quantity, serial numbers, and turn-in unit with a POC should be included in each box/container being turned-in. (d) M93 Transceivers to be upgraded should be shipped to DODAAC CMASD9, RIC CCA, citing contract number DAAE20-03-C-0044. In the clear address is as follows: RSL Electronics, USA, Inc. Borisch Manufacturing, Corp. 4511 East Paris, S. E. Grand Rapids, MI 49512 (2) Resilient Mounts identified in table 4, upon replacement, should be disposed of locally. (3) The attaching hardware for the Transceivers and Resilient Mounts, as identified in tables 3 and 4, are the same. If the upgraded transceiver is received without new attaching hardware, reuse the original attaching hardware. If new attaching hardware is included with the upgraded transceiver, the old attaching hardware should be disposed of locally. NOTE: New hardware was not considered part of the upgrade or engineering change proposal, however, after a few initial upgrades, the contractor is now including new attaching hardware with each upgraded transceiver. 9. SPECIAL TOOLS; TOOL KITS; JIGS; TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE); AND FIXTURES REQUIRED: Tools identified in table 5 by Part Number and NSN can be substituted with other tools that perform the same function. If these items are not readily available at the organizational level, the direct support shop should have them.