TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 76 of 263
TM 9-2920-225-34 2-10. HOUSING AND STATOR ASSEMBLY. TOOLS : No special tools required SUPPLIES : Electrical tape, MIL-T-50886 Housing seal Housing lip seal Tags PERSONNEL: One EQUIPMENT CONDITION : Generator removed from vehicle, pulley removed from generator. a. Preliminary Procedures. (1) Clean outside of generator before disassembly. Refer to para 1-3. (2) Remove drive end bell. Refer to para 2-8. (3) Remove fan and hub assembly. Refer to para 2-7. (4) Remove end housing. Refer to para 2-9. . Disassembly. NOTE If working on early model generator, do frame 1. If working on late model generator, go to frame 2. 1. Tag all leads (1) so that they can be put back the same way. 2. Unsolder three splice connections (2). 3. Take out two screws (3) and take stator (4) away from housing (5). GO TO FRAME 3 TA103561 2-60