TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 72 of 263
TM 9-2920-225-34 f. Assembly. FRAME 1 1. Put seal (1) into bore of end housing (2) with smooth side of seal toward drive end of generator. Put grease in cavity behind seal. 2. Slide end housing (2) onto short side of shaft of rotor (3). 3. Hold rotor (3) and press bearing (4) into bore of end housing (2) and onto shaft of rotor ( 3). Put grease around bearing. 4. Put seal (5) and sleeve seal (6) into end housing (2). END OF TASK TA103557 2-56