TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 46 of 263
TM 9-2920-225-34 1. Check that preformed packings (1 and 2) and seal (3) are not damaged or worn. If packings or seal are damaged, generator is nonrepairable. 2. Check that drive end housing (4), bearing retainer (5), and sleeve spacer (6) are not cracked, warped or damaged. If parts are damaged, generator is nonrepairable. 3. Measure inside diameter of drive housing bearing bore (7). Bore must be 2.0471 to 2.0477 inches. If bore is not within given limits, generator is non-repairable. GO TO FRAME 4 NOTE CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT IN THIS FRAME. PARTS WITHOUT CALLOUTS ARE SHOWN FOR REFERENCE PURPOSES OR ARE CHECKED IN ANOTHER FRAME. TA103530 2-30