TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 43 of 263
TM 9-2920-225-34 1. Using puller, drive shaft of rotor and fan assembly (1) from drive end housing (2) . 2. Take stator (3) from drive end housing (2). Tap lightly with soft-faced hammer if needed. 3. Press bearing (4) and seal (5) from drive end housing (2). 4. Pull roller bearing (6) and inner race (7) from shaft of rotor and fan assembly ( 1). END OF TASK TA103526 2-27