TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 233 of 263
TM 9-2920-225-34 I FRAME 4 1. 2. 3. 4. CAUTION When putting generator (1) in chain vise, do not clamp vise over nameplates and raised surfaces. Generator can come loose and damage equipment. Put generator (1) on mounting bracket (2) and tighten chain vise (3). Loosen four nuts (4) and aline generator pulley (5) with test stand pulley (6). Tighten four nuts. Loosen four nuts (7) behind generator mounting bracket (2). Lift mounting bracket and place belts (8) on test stand pulley (6) and generator pulley (5). Take up slack on belts (8) and tighten four nuts (7). END OF TASK TA 118944 2-217