TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 230 of 263
TM 9-2920-225-34 Section VIII. TESTS AND ADJUSTMENTS 2-23. TEST SETUP USING SUN MODEL (NSN 4910-00-767-0218) TEST STAND. 1. Place woodruff key (1) in shaft (2). 2. Aline pulley keyway (3) with key (1). Push pulley (4) onto shaft (2). 3. Put washer (5) on shaft (2) and put on nut (6). 4. Place pulley (4) in vise with soft-jaw caps. Using torque wrench, tighten nut (6) to 40 to 50 pound-feet. 5. Take pulley (4) out of vise. GO TO FRAME 2 TA 103527 2-214