TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 225 of 263
TM 9-2920-225-34 1. Measure inside diameter of bearing (1). Inside diameter (2) must be 0.9847 to 0.9844 inches. If bearing is not within given limits, get a new bearing. 2. Measure outside diameter of bearing (1). Outside diameter (3) must be 2.4412 to 2.4407 inches. If bearing is not within given limits, get a new bearing. 3. Check that bearing (1) is not damaged. Refer to TM 9-214. 4. Check that nut (4) and washer (5) are not stripped, worn or damaged. If parts are damaged, get new ones. END OF TASK NOTE: CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT IN THIS FRAME. PARTS WITHOUT CALLOUTS ARE SHOWN ONLY FOR REFERENCE PURPOSES OR ARE CHECKED IN ANOTHER FRAME. TA 103705 2-209