TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 222 of 263
d. Inspection and Repair. I FRAME 1 I 1. 2. 3. 4. 5. 6. Check that drive end housing (1) has no cracks or breaks. If end housing is damaged, generator is nonrepairable. Measure bearing bore (2) of drive end housing (1). Bore must be 2.4412 to 2.4407 inches. If bore is not within given limits, generator is nonrepairable. Check that rectifier mounts (3) are not cracked or broken and no damaged threads. Check that connector (4) has no damage, stripped threads, or wiring. If connector is damaged, generator is nonrepairable. that they have loose or frayed Check that screws (5) and washers (6) do not have damaged heads and that they are not broken. If parts are damaged, get new ones. Check that terminal cover (7) is not cracked or broken. If terminal cover is damaged, get a new one. GO TO FRAME 2 TA 103702 2-206